Description
Our BDSA is a compact, semi-automatic, electrically-controlled brewery with two structural tanks.
The BDSA is an easy-to-use, electrically-controlled brewhouse comprising a brewing/filtration tank and a boiling tank.
The BDSA incorporates a platform providing access to the top hatches of the tanks.
The brewery incorporates a series of stainless steel pipes connected to a transfer pump, which enables basic operations during the production process.
An important part of the equipment is a plate heat exchanger (whose size varies according to volume) which enables the wort to be cooled after the boiling and whirlpooling phase.
The MASH (brewing and filtration) tank is equipped with a gear motor and agitator to ensure proper homogenization of the mash.
The integrated filter, of modern design and easy handling, filters the wort.
Spent grains are discharged through the rectangular door.
Operations are controlled via the control panel, which indicates the temperature of the different phases of the process (with a thermostat), and activates/deactivates the motor and pump.
From 2024 onwards, these models will incorporate :
-Motor/gearbox screw drive with potentiometer
-MASH resistor power variator (for more precise temperature management)
-Pump speed variator
-This semi-automatic brewery is available in useful 300L, 500L and 1000L models, and can also be made for 1500L production (depending on the electrical power available in your room and the technical characteristics of your installation).
3 models are available:
BDSAXXXX, with non-thermally insulated tanks
-BDSAXXXX-1T, with thermally insulated BOIL tank
-BDSAXXXX-2T, with both tanks thermally insulated
Like the rest of our production, the BDSA Brewery is manufactured to the highest industrial and environmental standards.
Made of 304L stainless steel with 2B finish
High-quality, European-produced stainless steel.
BDSA Semi-automatic brewing/boiling system
Three-phase electrical operation
-Sheathed electrical resistors for each tank ** Stainless steel support structure and step tread
-Stainless steel support structure and access step
-Pipes and valves linking tanks with TRI-CLAMPS connections
-1 EBARA pump for hot liquids with by-pass for flow regulation
Boiling tank
-Top inspection hatch Ø400mm with safety system * Conical dome
-60°C conical dome with Ø150mm smoke outlet
-Stainless steel tubes/sheaths into which the electrical resistors are inserted.
Heat transfer by conduction.
-Whirlpool system with connecting piping and 1″”1/2 butterfly clamp valve.
-CIP system with lateral piping connected with clamp ferrule to upper dome + 1.1/2″” rotating washing ball
-Clear draft with CLAMP 1.1/2″ butterfly valve
-Total drain with CLAMP 1.1/2″ butterfly valve
-Sensor pocket with PT100 sensor
-Analog thermometer 0-100 °C connected with ferrule clamp
Mash tun
-Top loading hatch with safety system
-IP55 380V 1.5kw motor with comb agitator**.
-Dismountable spent grain filter
-Rectangular flap* on horizontal front for discharging spent grain with safety system and funnel flap
-Stainless steel tubes/sheaths under the filter, into which the electrical resistors are inserted *.
-Sparging system via wash ball channel, with Vorlauf
-CIP system with lateral piping connected with clamp ferrule to upper dome + 1.1/2″” rotating washing ball
-Clear draft with CLAMP 1.1/2″” butterfly valve
-Total drain with CLAMP 1.1/2″” butterfly valve
-Sensor pocket with PT100 sensor
-Acrylic level tube with drain valve
-Analog thermometer 0-100 °C connected with ferrule clamp
Stainless steel swivel control panel with digital temperature control thermostat with activation of heating elements, agitator and pump.
Electrical panel integrated into the structure with electrical elements to ensure system operation.
Semi-automatic control (allows temperature and motor/agitator/pump control).
TIG WELDING PROCESS
STANDARD FINISH:
Exterior finish in natural 2B stainless steel / Ra polish <0.8μm;
Interior finish – Ra <0.5 μm;
*Varies according to model. See for more information
**Power varies according to model. See for more information
Related products:
-FERIM (Isobarometric fermenter)
– FERATM (Atmospheric fermenters)
-CBS (Cuve de Brassage à Gaz)
-CES (Gas Boiling Tank)
CFS (Gas-fired hot water tank)
-CESP (Electric Boiling Tank)
-CFSP (Electric Hot Water Tank)
-CBSP (Electric Brewing Tank)
-Capper
-Embuteilleurse
-Labeller
-AG-DRD (Sistema di ayuda de evacuación de cereal)
-Commissioning
-Accessories
