Our BDSA is a compact, semi-automatic, electrically-controlled brewery with two structural tanks.
\nThe BDSA is an easy-to-use, electrically-controlled brewhouse comprising a brewing\/filtration tank and a boiling tank.
\nThe BDSA incorporates a platform providing access to the top hatches of the tanks.
\nThe brewery incorporates a series of stainless steel pipes connected to a transfer pump, which enables basic operations during the production process.
\nAn important part of the equipment is a plate heat exchanger (whose size varies according to volume) which enables the wort to be cooled after the boiling and whirlpooling phase.
\nThe MASH (brewing and filtration) tank is equipped with a gear motor and agitator to ensure proper homogenization of the mash.
\nThe integrated filter, of modern design and easy handling, filters the wort.
\nSpent grains are discharged through the rectangular door.
\nOperations are controlled via the control panel, which indicates the temperature of the different phases of the process (with a thermostat), and activates\/deactivates the motor and pump.
\nFrom 2024 onwards, these models will incorporate :
\n-Motor\/gearbox screw drive with potentiometer
\n-MASH resistor power variator (for more precise temperature management)
\n-Pump speed variator
\n-This semi-automatic brewery is available in useful 300L, 500L and 1000L models, and can also be made for 1500L production (depending on the electrical power available in your room and the technical characteristics of your installation).
\n3 models are available:
\nBDSAXXXX, with non-thermally insulated tanks
\n-BDSAXXXX-1T, with thermally insulated BOIL tank
\n-BDSAXXXX-2T, with both tanks thermally insulated
\nLike the rest of our production, the BDSA Brewery is manufactured to the highest industrial and environmental standards.
\nMade of 304L stainless steel with 2B finish
\nHigh-quality, European-produced stainless steel.
\nBDSA Semi-automatic brewing\/boiling system
\nThree-phase electrical operation
\n-Sheathed electrical resistors for each tank ** Stainless steel support structure and step tread
\n-Stainless steel support structure and access step
\n-Pipes and valves linking tanks with TRI-CLAMPS connections
\n-1 EBARA pump for hot liquids with by-pass for flow regulation
\nBoiling tank
\n-Top inspection hatch \u00d8400mm with safety system * Conical dome
\n-60\u00b0C conical dome with \u00d8150mm smoke outlet
\n-Stainless steel tubes\/sheaths into which the electrical resistors are inserted.
\nHeat transfer by conduction.
\n-Whirlpool system with connecting piping and 1″”1\/2 butterfly clamp valve.<\/p>\n
-CIP system with lateral piping connected with clamp ferrule to upper dome + 1.1\/2″” rotating washing ball
\n-Clear draft with CLAMP 1.1\/2″ butterfly valve
\n-Total drain with CLAMP 1.1\/2″ butterfly valve
\n-Sensor pocket with PT100 sensor
\n-Analog thermometer 0-100 \u00b0C connected with ferrule clamp<\/p>\n
Mash tun
\n-Top loading hatch with safety system
\n-IP55 380V 1.5kw motor with comb agitator**.
\n-Dismountable spent grain filter
\n-Rectangular flap* on horizontal front for discharging spent grain with safety system and funnel flap
\n-Stainless steel tubes\/sheaths under the filter, into which the electrical resistors are inserted *.
\n-Sparging system via wash ball channel, with Vorlauf
\n-CIP system with lateral piping connected with clamp ferrule to upper dome + 1.1\/2″” rotating washing ball
\n-Clear draft with CLAMP 1.1\/2″” butterfly valve
\n-Total drain with CLAMP 1.1\/2″” butterfly valve
\n-Sensor pocket with PT100 sensor
\n-Acrylic level tube with drain valve
\n-Analog thermometer 0-100 \u00b0C connected with ferrule clamp<\/p>\n
Stainless steel swivel control panel with digital temperature control thermostat with activation of heating elements, agitator and pump.
\nElectrical panel integrated into the structure with electrical elements to ensure system operation.
\nSemi-automatic control (allows temperature and motor\/agitator\/pump control).<\/p>\n
TIG WELDING PROCESS
\nSTANDARD FINISH:
\nExterior finish in natural 2B stainless steel \/ Ra polish <0.8\u03bcm;
\nInterior finish – Ra <0.5 \u03bcm;<\/p>\n
*Varies according to model. See for more information
\n**Power varies according to model. See for more information<\/p>\n
Related products:
\n-FERIM (Isobarometric fermenter)
\n– FERATM (Atmospheric fermenters)
\n-CBS (Cuve de Brassage \u00e0 Gaz)
\n-CES (Gas Boiling Tank)
\nCFS (Gas-fired hot water tank)
\n-CESP (Electric Boiling Tank)
\n-CFSP (Electric Hot Water Tank)
\n-CBSP (Electric Brewing Tank)
\n-Capper
\n-Embuteilleurse
\n-Labeller
\n-AG-DRD (Sistema di ayuda de evacuaci\u00f3n de cereal)
\n-Commissioning
\n-Accessories<\/p>\n","protected":false},"excerpt":{"rendered":"
Semi-Automatic Electrical Switching Rooms<\/p>\n","protected":false},"featured_media":6651,"template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[1236],"product_tag":[],"class_list":["post-9058","product","type-product","status-publish","has-post-thumbnail","product_cat-brewhouses","pa_autres-caracteristiques-double-semi-automatic","pa_autres-caracteristiques-double-semi-automatic-with-boiling-tank-isothermal-with-mash-tank-insulation","pa_autres-caracteristiques-double-semi-automatic-with-isothermal-boiling-tank","pa_autres-caracteristiques-double-semi-automatic-with-isothermal-boiling-tank-with-mash-tank-insulation-high-model","pa_autres-caracteristiques-double-semi-automatic-with-isothermal-boiling-tank-with-mash-tank-insulation-low-model","pa_autres-caracteristiques-double-semi-automatic-with-isothermal-boiling-tank-en","pa_autres-caracteristiques-double-semi-automatic-with-isothermal-boiling-tank-high-model","pa_autres-caracteristiques-double-semi-automatic-with-isothermal-boiling-tank-low-model","pa_capacite-1000-l-en","pa_capacite-1500-l-en","pa_capacite-200-l-en","pa_capacite-300-l-en","pa_capacite-500-l-en","first","instock","taxable","shipping-taxable","purchasable","product-type-variable"],"acf":[],"yoast_head":"\n